9/08 • 107033AE LoopStar® EtherNID™ – LoopStar® MetroNID™
LoopStar® EtherNID™ – LoopStar® MetroNID™
ADC's network interface devices for Ethernet and IP networks
5
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Service Creation and Traffic Conditioning

Service Mapping

Create E-Line, E-LAN & E-Tree services directly at the demarc point -service mapping applies C/V-LAN
tags (selective push) and/or configurable service class to traffic meeting detailed layer 2,3 & 4 criteria.

Bandwidth Policing

Limit upstream and downstream CIR/EIR by filtering criteria or for all traffic. Facilitates Carrier Ethernet
service provisioning and on-demand/incremental service upgrades.

Zero-Latency Traffic Shaping

Pre-conditioning of traffic to accelerate services and optimize access link bandwidth use. Passes highest-
priority traffic without added delay or jitter while other traffic is buffered until capacity is available.

Wire-speed Filtering

Filter wire-speed traffic at layer 1-2-3-4 (L2CP, BDPU, per VLAN, Ethertype, Protocol type, MAC, IP,
User Defined).

4-to-1 Multi-Port Aggregation

Latency-free, multi-port aggregation from 4 Fast Ethernet ports to a single GbE. De-aggregate by VLAN,
or any combination of Layer 2 -4 frame criteria.
General Functionality
Jumbo Frames Support: All functions supports Jumbo Frames up to 10,240 bytes at all rates
(10/100/1000 Mbps).
3 –Way Redundant Power: Units can be powered using 5VDC, or dual -48V feeds, all mutually
redundant.
SNMP v1 & v2c: Support SNMP v1 and v2c for monitoring, alarms, OSS integration and unit
configuration.
Embedded GPS: Optional feature, can be used as clock reference in place of the patent-pending
synchronization method normally used for 1-way delay & jitter measurements.