3/07 • 103266AE Indoor Fiber Distribution Terminal
OmniReach™ FTTX SolutionsIndoor Fiber Distribution Terminal
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Sizes
The IFDT products are designed to splice and terminate fibers in a range of sizes including 6, 12, 24, and
48 fibers.
Mounting Applications
The ADC IFDT cabinets are for indoor wall mount applications and are NEMA-12 rated. The dual hinged
design allows complete front and rear access. The two secure doors are locked with a standard can
wrench tool and may optionally be secured with a standard pad-lock. The unit may also be configured
for single lock entry thus allowing the products to be used for single access applications.
Fiber Management
For splicing applications, ADC splice trays can be installed to support either individual fusion splicing
or mass fusion splicing. The units provide sealed cable ports for cables and interconnection cables and
gaskets to protect against dust and water spray. The units can also be configured with a standard cable
grip kit to provide strain relief for incoming fiber cables. The splice compartment provides ample space
for storing loose-tube, ribbon or individual fiber slack.
6-Port 12-Port
24-Port 48-Port