| Before You Use the Product |
Installing the Product |
|
Install in a flat and stable location. | Firmly tighten the 2 screws (not supplied). |
Mounting plate
Screw
Screw
(Installation)
•Distance between tapped holes: 114 mm (4.49 in.)
•Tapped hole diameter: 6 mm (0.24 in.)
•Mounting plate thickness: 1 mm (0.04 in.)
aWARNING
Install the camera securely.
●When installing the camera on the ceiling, contact your Canon dealer.
●When installing the camera on the ceiling, check that the ceiling is strong enough to bear the weight of the camera including the installation bracket. Installation in a weak location could result in the camera falling and causing serious injury.
●At least once a year, check for looseness in the camera installation mount. (If the optional
*The
The permissible camera installation angles are ±20° from the horizontal. (±15° when the optional
NOTE
ENGLISH
Using a Tripod
The screw mount for a tripod is located in the center of the underside of the camera.
● Do not overtighten the mounting screw.
30 mm |
Less than
NOTE
If excessive force is used to tighten the mounting screw, camera head movement may be impeded, or other malfunctions may result.
(1.18 in.) |
or wider |
6.0mm
(0.24 in.)
Mounting screw
●Always use a tripod mounting screw that is less than 6.0 mm (0.24 in.) in length. The use of screws 6.0 mm (0.24 in.) long or longer could damage the camera. Also, the tripod seat used should be at least 30 mm (1.18 in.) in diameter.
13
