ID Mode
Cancelling ID Mode
<Example> In this example, the selection made in the previous section of the cameras with
ID number 2 is cancelled. The camera LEDs are as shown below.
ID1ID2ID2ID3
Orange Green Green Orange
Check the LEDs on all the adjacent connected cameras to ensure that all the
cameras are receiving the signals from the wireless controller.
NOTE
BRIGHTZOOM
T
W
HOME
SET/OKCANCEL
AF | 1 | 2 | 3 |
MF | 4 | 5 | 6 |
∞ | 7 | 8 | 9 |
| |||
|
| 0 |
|
ON SCREEN Fn | ID | MENU |
1.Press the i button.
The LEDs on all the adjacent connected cameras blink orange (at
ID1 | ID2 | ID2 | ID3 |
Blinking orange Blinking orange Blinking orange Blinking orange
To cancel ID mode operation, press the c or i button. The LEDs on all the ID2 cameras turn green and the LEDs on the other cameras turn orange.
2.Press the 0 button.
The LEDs on all the cameras turn green as for normal operation.
ID1ID2ID2ID3
Green Green Green Green
This completes ID mode cancellation. All the cameras will now respond simultaneously to the signals from the wireless controller.
ENGLISH
37