Before You Use the Product
Turning the Power ON and OFF
The
to AC outlet
Camera
Monitor
AC adapter
AC cable
● Whenever you turn the camera on, the first use of the PC or wireless
NOTE
controller to control the camera initializes the camera head position.
(Initialization takes several seconds.) The LED on the camera flashes green (at
●Never touch the camera head during initialization. This could prevent successful initialization and cause faults.
●Wait at least five seconds before turning the power back on after shutting it off. Turning it on too quickly may result in a malfunction. Observe the precautions given in “a Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS” (→
LED Displays and the Camera Status
LED Display | Camera Status | ||
Green |
| Camera is on. (→ P.26) | |
|
|
| |
| At | Wireless controller button being used. | |
|
|
| |
Blinking green | At | Storing or restoring a preset (→ P.25), or displaying | |
a setting menu. (→ P.27) | |||
|
| ||
|
|
| |
| At | Camera head position initialization in progress. | |
|
|
| |
Orange |
| Individual camera operation in progress and this camera | |
| is not selected. (→ P.36) | ||
|
| ||
|
|
| |
| At | Camera is not selected for individual operation and is | |
| being controlled from the wireless controller. (→ P.36) | ||
Blinking orange |
| ||
|
| ||
At | The camera is being selected or deselected for | ||
| |||
| individual operation. (→ P.36) | ||
|
| ||
|
|
| |
Red |
| Camera is off. (→ P.26) | |
|
|
| |
Off |
| Power is off. (Power is not connected to the camera.) | |
|
|
|
18