Troubleshooting
The camera will not move to a preset position.
Check 1: The camera head will not move to the limit of its range of movement.
Response: Something has directly moved the camera head. Press the h button on the wireless controller. → P.21
Check 2: The range of pan/tilt movement has been changed since the preset position was stored.
Response: Store the preset position again. → P.25
The camera will not focus.
Check 1: The camera is set to manual focus mode.
Response: Focus the camera manually or press the a button on the wireless controller to switch to
Check 2: The lens is dirty.
Response: Clean the lens. → P.10
Check 3: You restored a preset position.
Response: If a preset position is restored when the camera is in manual focus mode, the camera may be out of focus once it has moved to the preset position. Adjust the focus manually or press the a button on the wireless controller to switch to
Check 4: The distance between the subject and the camera is not within the camera’s focal range.
Response: Depending on the zoom position, the camera may not be able to focus at some distances regardless of whether it is in
→P.22
Check 5: You are using
Response: Adjust the focus manually. → P.24
ENGLISH
39
