9. To cancel a programme in progress
Press the " START " push button for 5 seconds to cancel the setting or the running of the current programme. An intermittent audible signal will be heard and all the
indicator lights will turn off while in the digital display 3 horizontal lines will appear.
After 5 seconds the dishwasher will return to setting mode.
It is now possible to select a new washing programme.
10. At the end of the washing programme
The dishwasher will automatically stop and an intermittent audible signal will be heard when the programme has ended.
3 flashing horizontal lines will appear in the digital display and all the indicator lights (drying phase included) will turn off.
You cannot select a new programme if the previous programme has not been completed or cancelled. Press the On/Off push button and open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
Important!
In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
13
