For the locations of remote control buttons, refer to page 46.

Program Playback of an MD

This function allows you to program up to 32 tracks.

While the MD is stopped

1 Set the remote control mode selector to AUDIO.

2 Press to select "PROGRAM".

Example: Display while MD program playback is selected

Program indicator

3 Press the number buttons ( - or ) to select the track num-

bers.

Refer to "Using the number buttons"

( page 16).

Track number Program number

Total time for program playback

NOTE

When you want to erase the program, press while playback is stopped. Programmed tracks are erased one by one from the last track. Holding

down erases all programmed tracks.

When you try to program the 33rd track, "MEM- ORY FULL" appears in the display window to indicate that 33 or more tracks cannot be pro- grammed.

When total time for program playback reaches 2 hours 31 minutes, "--:--" appears.

4 Press .

NOTE

You can set tracks for program playback either from a CD, MD or DVD.

Confirming the programmed track order

While playback is stopped, press

or repeatedly.

You can add a track as the last track in the program, or erase the last track.

( step 3 shown on the left)

Canceling the program playback

While playback is stopped, press

repeatedly to display an item other than "PROGRAM".

• This operation does not erase the program.

Erasing all the programmed tracks

While playback is stopped, hold down

.

NOTE

Ejecting the MD or turning off the main unit also erases all the programmed tracks. This operation also cancels program playback.

Listening to MDs English

48

Page 51
Image 51
JVC UX-QD70S, UX-QD70W Program Playback of an MD, Confirming the programmed track order, Canceling the program playback