JVC UX-QD70S, UX-QD70W manual Listening to Radio Broadcasts, Setting the AM Tuner Spacing

Listening to Radio Broadcasts

This product can receive FM and AM radio broad- casts.

Remote control mode selector

Number buttons

CAUTION

• Set the remote control mode selector to AUDIO before using the number buttons.

Setting the AM Tuner Spacing

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.

On the main unit ONLY:

■When the main unit is turned off

To select 10 kHz spacing, while holding down

on the main unit, press on the main

unit to turn on the power. "AM 10 kHz SP" appears in the display window.

To select 9 kHz spacing, while holding down

on the main unit, press on the main

unit to turn on the power. "AM 9 kHz SP" appears in the display window.

NOTE

•If the spacing is switched, the memory in which the radio stations were stored will be erased.

Selecting a Radio Station

1 Press to select "FM" or "AM".

Example: While an FM radio broadcast is received

Stereo indicator Preset number ( page 21)

Frequency

2 Press or repeatedly to select a radio station (frequency).

•You can also select a radio station using the automatic tuning.

Automatic tuning:

Hold down or until the frequency

starts changing, and then release the button. When the main unit has received a broadcast, the frequency automatically stops changing. To quit the function while searching for a

broadcast, press or .

•When the main unit has received an FM stereo broadcast, "STEREO" lights up.

Switching the FM reception (stereo/ monaural):

If an FM stereo broadcast is difficult to hear because of noise, you may be able to hear

more easily by pressing to switch

the sound to monaural reception. In this case, "MONO" lights up. To return the sound

to stereo reception, press again.

Basic Operations/Listening to Radio Broadcasts English

20