Recording Sound to Cassette Tapes
Main unit
Remote control
Preventing recorded sound from being erased
•Write protect tags are attached to a cassette tape for preventing the erasing of recorded sound. They enable you to avoid losing impor- tant recordings because once you snap off the write protect tags, you cannot record to the cas- sette tape or erase recorded material.
•When you want to use the cassette tape for recording again, cover the tag holes with adhe- sive tape.
NOTE
•The sound input level during recording is automati- cally adjusted.
•When you record tracks from a disc or MD, a 4- second blank is inserted between tracks in the recording. You can record tracks with no blank
time. ( "Recording with No Blank Time between Tracks" on page 56)
CAUTION
•It may be unlawful to record or playback copyright material without the consent of the copyright owner.
•Do not use long cassette tapes such as
•Since this product is not compatible with TYPE II and TYPE IV cassette tapes, do not use these types of cassette tapes. This product does not meet the specifications for these tapes, so sound is not properly recorded to these types of cassette tapes. You cannot obtain proper playback sound.
| Write protect | Write protect |
1 | tag for side B | tag for side A |
Insert a cassette tape for record- |
ing.
• Before inserting the cassette tape, wind the tape past the leader part of the cassette tape.
Magnetic tape
(recordable part) Leader tape (unrecordable part)
2 Press to select the reverse mode.
•Each time you press , the display changes as follows.
: For
: For one return recording on both
sides.
: Pressing on the main unit in step 4 sets the reverse
mode to automatically.
•You can change the reverse mode during recording.
55