JVC UX-QD70S Select a sound source, Insert an MD for recording, Hold down, on the main, Press

For the locations of remote control buttons, refer to page 51.

1 Select a sound source.

Sound source		Operation
Radio	Select the radio station whose broad-
	cast you want to record
broadcast
	(	page 20).
	Insert a cassette tape for playback,
Cassette tape	press	, and then press	.
playback	Press	to select the reverse
	mode when necessary.
Sound from	Press	repeatedly to select AUX
other equip-	or AUX-DIGITAL, and prepare play-
ment (AUX/
	back on the other equipment
AUX-DIGITAL)

( page 45).

2 Insert an MD for recording.

•Confirm the MDLP, "LP: " indicator and

group recording settings. ( pages 51 and 53)

•Close the write protect knob on the MD

( page 75).

3 Hold down on the main

unit for approximately 4 seconds to display the track mark options.

4 While the track mark options are

displayed, press to select a track mark option.

•Each time you press , the display changes as follows.

: Each time you press on the

remote control during recording, a track mark is set (factory setting).

: Track marks are automatically set in 5-minute intervals.

: When no sound is produced for 3 or more seconds, a track mark is automatically set. You can also insert a track mark by

pressing on the remote control.

5 Press on the main unit.

Example: Display while FM radio broadcast is recorded

•When recording the sound from other equip- ment, wait until "AUX → MD" appears, and then start playback of the connected equip- ment. Recording automatically starts when sound is input to the main unit.

You can also start recording by pressing

.

With this method, even when sound from the connected equipment pauses for 30 or more seconds, the main unit does not auto- matically quit recording.

Quitting Recording

Press .

Changing the display in the display window during recording

Press .

•Each time you press , the display changes as follows.

Recording sound source name

Remaining time for recording

Recording sound source name

Recording MD track	Recording MD group
number	number
	(When tracks have
	not been recorded in
	a group, " - -"
	appears.)

Clock display

Recording Sound English

54