Recording Sound to MDs
Main unit
Remote control
Recording All Tracks from a Disc to an MD
1 Press 
, and then press
.
•The DVD/CD is selected as the sound source and playback is stopped.
■When recording sound from DVD VIDEOs or DVD VRs
•While playing back a title or chapter, press
to pause playback, and then press
to return to the beginning of the first title/chapter.
•You may not be able to record a DVD VIDEO or DVD VR depending on the disc.
2 Insert an MD.
•Close the write protect knob on the MD
beforehand ( 
page 75).
3 Press 
to select the MDLP mode.
•Each time you press 
, the display changes as follows.
:For standard stereo recording (Maximum recording time is 80 min- utes with an MD 80).
:For ×2 extended stereo recording (Maximum recording time is 160 min- utes with an MD 80).
:For ×4 extended stereo recording (Maximum recording time is 320 min- utes with an MD 80).
•As you change the MDLP mode
(SP→LP2→LP4), the sound quality also changes. When you want to record sound at the best possible quality, select the SP mode.
•When you use an MD car audio system, portable MD player or other MD player that is not compatible with the MDLP mode, select the SP mode.
•You can check the remaining recording time
(REC REMAIN) by pressing 
repeat- edly. The recording time differs depending on the MDLP mode.
4 Press 
to set group recording.
•Each time you press 
, the display changes as follows.
:Activates group record- ing (factory setting).
: Cancels group recording.
•You can form or cancel a group after the
recording finishes. ( 
pages 63 and 66)
5 Press 
to select the recording speed.
•Each time you press 
, the display changes as follows.
:×5 high speed recording (only for CDs)
: Normal speed recording
•Select "NORMAL REC" when you want to play back a disc other than a CD.
•Recorded sound quality is the same for both "HIGH SPEED" and "NORMAL REC".
•You cannot listen to the sound during ×5 high speed recording.
51
