Toshiba MW26H82 Clock setting, Auto clock setting To set auto clock to OFF, Auto clock adjustment

Clock setting

The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the unit is connected to an antenna or cable system and it is turned off. As the unit searches for a receivable station in your area and it receives a broadcast signal for auto clock, the auto clock needs several minutes to set itself.

TV/VCR

POWER

ENTER

C/D/B/A

MENU

RETURN

Auto clock setting To set auto clock to OFF

Preparation:

•Connect the antenna or cable system.

•If you use a cable box, turn it on.

•Plug the AC power cord to the AC outlet.

1Make sure the unit is turned off.

•If you press POWER, the Auto Clock set is not effective.

2Wait at least three minutes and press POWER.

• Depending on the reception

condition, it may take approx. thirty

minutes.

POWER • The POWER indicator will light.

3 Press TV/VCR to select TV/VCR mode.

Auto clock adjustment

The Auto clock adjustment will be performed at 12:00 PM everyday if you turn off the unit.

•If you use a cable box and you want Auto Clock adjust- ment to be performed, the cable box must be left on.

•The Auto Clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

When shipped from factory the AUTO CLOCK is set to “ON”.

But if you do not want auto clock set (Adjustment):

1 Press MENU in the TV mode, then press or to select TV SETUP menu.

TV SETUP
LANGUAGE		ENGLISH
CLOCK SET
AUTO CLOCK		ON
STANDARD TIME
DAYLIGHT
	SAVING TIME	AUTO
	:SELECT	:ADJUST
		RETURN:END

2 Press or to select “AUTO CLOCK”.

TV SETUP
LANGUAGE	ENGLISH
CLOCK SET
AUTO CLOCK	ON	/OFF
STANDARD TIME
DAYLIGHT
SAVING TIME	AUTO
:SELECT	:ADJUST
	RETURN:END

3 Press or to select “OFF”.

TV SETUP
LANGUAGE	ENGLISH
CLOCK SET
AUTO CLOCK	ON/	OFF
STANDARD TIME
DAYLIGHT
SAVING TIME	AUTO
:SELECT	:ADJUST
	RETURN:END

4 Press MENU repeatedly until the menu screen is cleared.

• When the AUTO CLOCK is set to “OFF”, the Auto Clock adjustment does not function.

• Set the clock manually 23 .

Notes:

•If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.

•The TV section has its own menu and also DVD section has its own menu 72 .

•If no buttons are pressed for more than 60 seconds, the TV/VCR menu screen will return to normal TV operation automatically.

Basic setup

21

5V90101A [E]p20-23 21 8/4/06, 5:44 PM