Toshiba MW26H82 owner manual Symptoms Cause Possible Solutions VCR, Remote Control

SYMPTOMS

CAUSE

POSSIBLE SOLUTIONS

PAGE

VCR

TV recording does not work.	The video cassette's erase prevention tab	Place a piece of adhesive tape over the	46
	is broken off.	hole.
	The time is not set correctly.	Reset the present time.	23
Timer recording does not	The recording start/end time is not set	Reset the start/end time.	53
	correctly.
work.
	The TIMER REC button is not pressed (the	Press TIMER REC (the TIMER REC	53
	TIMER REC indicator is not lit).	indicator is lit).
	Tape is old or worn.	Replace the tape.	–
Noise bars appear on the	Tracking adjustment is beyond range of	Adjust tracking manually using TRK +/–	48
screen.	automatic tracking circuit.	on the remote control.
	Video heads are dirty.	Clean the video heads.	50
DVD
	The disc is dirty.	Eject the disc and clean it.	8
The playback picture has	It is in fast forward or fast reverse playback.	Some times a small amount of picture	–
occasional distortion.		distortion may appear. This is not a
		malfunction.
	No disc is inserted.	Insert a disc.	47
	An unplayable disc is inserted.	Insert a playable disc (Check the disc	9
		type and color system).
The unit does not start	The disc is placed upside down.	Place the disc with the playback side	47
		down.
playback.
	The disc is not placed within the guide.	Place the disc correctly inside the guide	47
		on the disc tray.
	The parental lock function is set.	Cancel the parental lock function or	76, 77
		change the parental lock level.
Playback does not follow the	It is in the mode of repeat playback,	These operations may prevent a	–
course of the disc’s program.	memory playback, etc.	proper progress of the contents.
“ ” appears on the screen.	The function is prohibited with the unit or	–	9
	the disc.
REMOTE CONTROL
	The remote control is not aimed at the	Aim the remote control at the remote	12
	sensor.	sensor.
	Distance is too far or too much light in the	Operate within 5 m or reduce the light	12
Remote control does not	room.	of the room.
	There is an obstacle in the path of the	Clear the path of the beam.	12
operate.
	beam.
	The batteries are weak.	Replace the batteries.	12
	The batteries are not inserted correctly.	Insert correctly.	12

Others

81

5V90101A [E]p78-82 81 8/4/06, 5:49 PM