Toshiba MW26H82 owner manual Duplicating a video tape, Other functions VCR, VIDEO2

Other functions (VCR)

TV/VCR

Duplicating a video tape

If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before	INPUT
turning on the power.

STOP

REC

SPEED

Duplicating a video tape

Preparation:

•Press TV/VCR to select the TV/VCR mode.

•Load a cassette tape with the erase prevention tab intact.

•Load a previously recorded tape into the playback VCR or Camcorder.

1 Press SPEED to select the desired tape speed SP or SLP.

It is recommended to set the Speed to the SP mode on the recording VCR

for best results.

Press INPUT repeatedly to select VIDEO1 or

2 VIDEO2.

	SOURCE SELECTION
VIDEO1: on	1.	VIDEO1
	0.	ANT
the rear panel	2.	VIDEO2
	3.	ColorStream HD
	4.	HDMI
VIDEO2: on
		/ 0-4:SELECT

the front panel

3 Press REC.

4 Press PLAY on the playback VCR or camcorder.

5 Press STOP when you finish after duplicating.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or crimi- nal liability.

Connection with second video recorder

• Select “VIDEO1” on step 2.

Playback VCR

To VIDEO OUT	To AUDIO (R) OUT
Audio/Video cable (not supplied)	To AUDIO (L) OUT
Recording VCR

To VIDEO IN

To AUDIO (R) IN

To AUDIO (L) IN

Connection with Camcorder

• Select “VIDEO2” on step 2.

Playback Camcorder

Recording VCR

To AV Jack

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN Audio/Video cable (not supplied)

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

Other functions (VCR)

55

5V90101A [E]p52-56 55 8/4/06, 5:47 PM