Toshiba MW26H82 owner manual VCD Zooming, VCD Locating desired scene, Advanced playback DVD

Advanced playback (DVD)

Zooming/Locating desired scene

DVD

VCD Zooming

CD

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1 Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM1 (x 1.3),2 (x 1.5) and3 (x 2.0).

1

DISPLAY

0–9

JUMP

ENTER

// /

CANCEL

ZOOM

DVD

VCD Locating desired scene

CD

Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback. In the case of VCD/CD disc, time and track are used to locate the desired point to playback.

To check the title, chapter and time, press DISPLAY.

Press JUMP during playback or resume

1 stop mode.

Jump

Title

Chapter

Time

2 Press // / to view a different part of the frame.

You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.

3 In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off).

2 Press or to select the “Time”, “Title/Track” or “Chapter”.

Jump

Title

Chapter

Time

3	Press Number buttons (0–9) to input the number.
		Jump
	Title
	Chapter	12
	Time

•If you input a wrong number, press

CANCEL.

•Refer to the package supplied with the disc to check the numbers.

Notes:

•You can select the Pause, Slow or Search playback in the zoom mode.

•Some discs may not respond to zoom feature.

4 Press ENTER. Playback starts.

• When you change the title, playback starts from Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Notes:

•In case of the Audio CD and Video-CD, only Track and Time can be selected.

•In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page 65 .

60

5V90101A [E]p57-60 60 8/4/06, 5:48 PM