Toshiba MW26H82 owner manual To memorize channels, TV/CABLE selection To ADD/ERASE channels

ADDING CHANNEL ADD /ERASE

CH SIGNAL 1 ANALOG 2 ANALOG 3 ANALOG 4 ANALOG 5 ANALOG

5 - 0 0 1 DIGITAL

5 - 0 0 2 DIGITAL

CLEAR ALL SETUP MENU

:SELECT

A D D / E R A S E

To memorize channels

This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit’s memory. To use this unit with an antenna, set the TV/CABLE selection to the TV position. When shipped from the factory, this selection is in the CABLE position.

// /

MENU

RETURN

TV/CABLE selection To ADD/ERASE channels

Press MENU in the TV mode, then press or 1 to select TV SETUP menu.

TV SETUP
LANGUAGE		ENGLISH
CLOCK SET
AUTO CLOCK		ON
STANDARD TIME
DAYLIGHT
	SAVING TIME	AUTO
	:SELECT	:ADJUST
		RETURN:END

2 Press	or	to select “TV/CABLE”.
		TV SETUP
		TV/CABLE	TV/ CABLE
		CH PROGRAM
		ADD/ERASE
		CLOSED CAPTION	OFF
		:SELECT	:ADJUST
			RETURN:END

3 Press or to select “TV” or “CABLE”. TV - VHF/UHF channels

CABLE - Cable TV channels

TV SETUP
TV/CABLE	TV /CABLE
CH PROGRAM
ADD/ERASE
CLOSED CAPTION	OFF
:SELECT	:ADJUST
	RETURN:END

4 Press RETURN to clear the menu screen.

Automatic memory tuning

Press MENU in the TV mode, then press or to select TV SETUP menu. Press or to select the “CH PROGRAM”, then press .

The TV will begin memorizing all the channels available in your area.

TV SETUP
TV/CABLE	CABLE
CH PROGRAM
ADD/ERASE
CLOSED CAPTION	OFF
:SELECT	:ADJUST
	RETURN:END

1 Press MENU in the TV mode, then press or to select TV SETUP menu.

Press or to select “ADD/ERASE”.

TV SETUP		TV
		operation
TV/CABLE	CABLE
CH PROGRAM
ADD/ERASE
CLOSED CAPTION	OFF
:SELECT	:ADJUST
	RETURN:END

2 Press .

The ADD/ERASE menu will appear.

Press or to select “ADD/ERASE”, then press .

ERASE

ADD

ERASE

ERASE

ADD

ADD

ADD

:ADJUST

3 Press or to select the channel you want and then press or to select “ADD” or “ERASE”.

ADD /ERASE
ADDING CHANNEL
ADD /ERASE
CH	SIGNAL
1	ANALOG	ADD/	ERASE
2	ANALOG	ADD
3	ANALOG	ERASE
4	ANALOG	ERASE
5	ANALOG	ADD
5 - 001	DIGITAL	ADD
5 - 002	DIGITAL	ADD
CLEAR ALL
SETUP MENU
:SELECT		:ADJUST

Repeat steps 3 for other channel you want to

4 add or erase.

5 Press RETURN to clear the menu screen.

To add a digital channel you are watching:

Select a channel you want to add. Then select “ADDING CHANNEL” in step 2, then press .

27

5V90101A [E]p24-31 27 8/4/06, 5:44 PM