Toshiba MW26H82 owner manual Convenient function, Repeat playback Using the real time tape counter

The playback will be repeated endlessly.

Convenient function

DISPLAY

// /

MENU

PLAY

COUNTER RESET

REC

Repeat playback Using the real time tape counter

The entire video tape will be played until its end. The tape will automatically rewind to the beginning and the playback will be repeated.

1 Press MENU, then press or to select VCR SETUP menu.

VCR SETUP
TIMER REC SET	OFF
AUTO REPEAT
:SELECT	:ADJUST
	RETURN:END

2 Press	or	to select “AUTO REPEAT”.
		VCR SETUP
		TIMER REC SET	ON/ OFF
		AUTO REPEAT
		:SELECT	:ADJUST
			RETURN:END

The on-screen real time tape counter shows the tape running time in hours, minutes and seconds. You can easily determine how long the tape has been running or how much time is left on the tape.

1 Press DISPLAY.		￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿	￿￿￿￿
			￿￿￿￿￿￿￿￿
	Press COUNTER RESET to set the counter to
2	“00:00:00”.	￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿	￿￿
			￿￿￿￿￿￿￿￿	￿￿

Playback (VCR)

3	Press or	to select “ON” or “OFF”.
		If “ON” is selected, the playback will

be repeated endlessly.

VCR SETUP
TIMER REC SET	ON /OFF
AUTO REPEAT
:SELECT	:ADJUST
	RETURN:END

4 Press MENU repeatedly until the menu screen is cleared.

If you press DISPLAY, “” will appear on the screen 24 .

5 To start the playback, press PLAY.

To cancel repeat mode:

In step 3 above, press or to select “OFF” position. Press MENU repeatedly until the menu screen is cleared. The repeat function is canceled automatically when the unit is switched off.

Begin Playback or Recording to start the tape,

3 the counter will display the elapsed time.

4 When you wish to make the counter disappear, press DISPLAY once again.

49

5V90101A [E]p46-51 49 8/4/06, 5:47 PM