Toshiba MW26H82 owner manual MPEG2 sound, Channel digital stereo

Connections

Connecting to optional equipment (Continued)

Connecting to an amplifier equipped with a MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Rear of the unit

Amplifier equipped with an

MPEG2 audio decoder

To COAXIAL type digital audio input

To OPTICAL type digital audio input

To OPTICAL DIGITAL AUDIO OUT

To COAXIAL DIGITAL AUDIO OUT

Optical digital cable (not supplied)

Connect either

75 Ω coaxial cable (not supplied)

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Rear of the unit

Amplifier equipped with a

Digital audio input

To COAXIAL type digital audio input

Connect either

To OPTICAL type digital audio input

To OPTICAL DIGITAL AUDIO OUT

Optical digital cable (not supplied)

75 Ω coaxial cable (not supplied)

To COAXIAL DIGITAL AUDIO OUT

Notes:

•DO NOT connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompat- ible with the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the unit.

•Connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the unit to the “OPTICAL” or “COAXIAL” input of a Receiver or Processor.

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier’s power on, the speakers may be damaged.

18

5V90101A [E]p13-19 18 8/4/06, 5:43 PM