The control panel
1.On/Off indicator light
2.On/Off push button
3.Indicator lights
Open door
Illuminates when the door has not been properly closed.
Salt
Illuminates when the salt has run out, to remind you to refill the salt container.
Water tap
Flashes when:
-The water tap is closed.
-The mains water supply has been cut off.
-The inlet hose may be blocked.
Rinse aid
Illuminates when the rinse aid has run out, to remind you to refill the rinse aid dispenser.
4. Programme selection push button
| For the setting of the wash programme refer to the |
|
| |
| "Washing programmes" chart. |
|
| |
5. | Half load push button |
|
| |
| This option is useful and economical when only a few |
|
| |
| dishes need washing. |
|
|
|
| The prewash phase will be automatically excluded. |
|
| |
| Remember to load all the dishes into both baskets. |
|
| |
| When this option is selected the corresponding indicator |
|
| |
| light comes on. |
|
|
|
| This option is | not available with the following |
|
|
| programmes: |
|
|
|
| Programme 1 | (Rinse and Hold) |
|
|
| Programme 8 | (Quick wash 50°C) |
|
|
| Programme 11 | I |
|
|
| (Daily 30 ) |
|
| |
| Programme 12 | (Plate warmer) |
|
|
6. | Drying options push button |
|
| |
| By pressing this push button you can opt to: |
|
| |
| 1. reduce the temperature of the drying phase ( | Eco Dry | ) | |
2.reduce the temperature of the water in the last rinse
(No Dry )
The indicator light corresponding to the selection will come on.
Eco Dry
No Dry
This option is not available with the following programmes:
Programme 1 | (Rinse and Hold) | |
Programme 8 | (Quick wash 50°C) | |
Programme | 11 | I |
(Daily 30 ) | ||
Programme | 12 | (Plate warmer) |
If both indicator lights are off, the normal drying phase will be carried out.
7.Digital display
8.Delay start push button
Allows the start of the programme to be delayed by a minimum of 1 hour, up to 12 hours.
9. Programme start push button
This is the last push button to press after having set the programme and closed the door.
It starts the programme.
10. Programme phase indicator lights
Each phase is indicated with a symbol:
Prewash / Rinse and Hold
Wash
Rinse
Drying
As soon as you select a washing programme, this illuminates all the phases the programme consists of. As the programme progresses, the phase under way will illuminate.
At the end of the programme the phase indicator lights turn off.
4
