Adcom GTP-870HD user manual Basic Recording, Making an Audio/Video Recording, Operations, Notes

Basic Recording

Follow these steps make a recording using the play- back and recording components connected to the GTP-870HD. You will first need to identify your Source and Target components.

•Source - This can be the AM/FM tuner or any connected audio/video device (e.g, a cable box, DVD player, VCR, etc.).

•Target - This can be any connected recording device (e.g., a VCR, DVD recorder, PVR, tape re- corder, etc.).

Making an Audio/Video Recording

1Before you begin:

•Power on the GTP-870HD.

•Power on your Source component.

•Power on your Target component.

•Power on your TV/display (if applicable).

•Power on your amp/subwoofer (if applicable). 2 Select your Source device.

•Press the desired Source selector button (Tuner, Video 1~Video 4 or CD) on the GTP- 870HD.

3Cue your Source device.

•Tune to the desired radio or TV station, or insert and cue up the media (video, CD, DVD, PVR, etc.) you wish to record.

4Cue your Target device.

•Insert and cue up the recordable media (blank tape, CD-R/RW, DVD-R/RW, etc.) you wish to record to.

5Start recording.

•Start recording on your Target component, then start playback on your Source compo- nent.

•The output signal from your Source compo- nent will be heard through your speaker sys- tem and/or seen on your display device.

Notes:

•You can record using composite and S-video con- nections interchangeably, but you won’t be able to record sources connected to the Component video inputs.

•Some audio/video sources are copy-protected, and cannot be recorded.

Chapter 4 - Operations

www.adcom.com GTP-870HD Owner’s Manual 59