11Bass button
When Tone Control is on (by pressing the By- pass button), displays a Bass adjustment dis- play. Use / to set the desired Bass level.
12Treble button
When Tone Control is on (by pressing the By- pass button), displays a Treble adjustment dis- play. Use / to set the desired Treble level.
13Sleep button
Sets the sleep timer to power the
14Backlight button
Turns the remote control backlight on.
•The backlight times out after ~8 seconds.
15Mute button
Mutes the audio for the selected input.
16Volume / buttons
Adjust the volume level for the selected input from
17Setup button
Displays the
18Menu button
Programmable button. In Main mode, displays the Setup menu. Can be taught to display the Disc Menu on your DVD player.
19Select button
Displays the Picture Format menu. Use / to select a preset format (Auto, Full, Zoom, Squeeze, or Non Linear Stretch) to suit your display device and source material.
•Also use the Select button to make selections in setup menus and
20Stop button
Programmable button. Can be taught to stop playback of the selected source component.
21Mode button
Steps through all available surround modes (e.g., Dolby Digital, DTS, etc.) for the selected input.
•The Mode button overrides the preset sur- round mode for the selected input.
22TH-EQ button
Turns Theater EQ sound on and off.
23Ch-Trim button
Displays the Channel Balance menu, which al- lows you to make custom adjustments to indi- vidual speaker levels during playback. A test tone option is provided.
24Tune -/+ buttons
In Tuner mode, manually scans the selected tuner band, or selects stored presets.
25Test button
Plays a test tone for a few seconds in each speaker to aid in setting channel balance.
26St/Mon button
In Tuner mode, switches between Stereo and Mono reception.
•Choosing Mono may improve reception of a poor quality FM station.
27Seek button
In Tuner mode, scans the selected band and automatically tunes in stations with strong sig- nals.
28Preset/Tune button
In Tuner mode, switches between manual and preset tuning.
29Sync button
Displays the Lip Sync Delay menu. If the pic- ture and soundtrack are out of sync, use / to delay the audio signal from
•While the Lip Sync Delay menu is displayed, press the Sync button again to toggle lip sync delay on and off.
30Dynamic Range button
Adjusts the dynamic range; i.e., the difference between the loudest and quietest passages in an audio soundtrack.
•The default setting is 100% (maximum range).
31Bypass button
Toggles Tone Control on and off. When Tone Control is on, use the Bass and Treble buttons to manually adjust the tone.
32Dim button
Steps through three brightness level for the front panel display.
33Macro buttons (1~4)
Programmable buttons. Can be taught to store and execute up to ten button presses; see page 52.
Chapter 1 - Welcome
www.adcom.com | 9 |
