Adcom GTP-870HD Remote Control Overview, 1Main button, 2Source Selector buttons, 3Power button

Chapter 1 - Welcome

Remote Control Overview

The following is an overview of the GTP-870HD re- mote control buttons and their operations.

Note: The GTP-870HD has a programmable remote that can be “taught” to control virtually any compo- nent in your home theater system. To program the remote for each input source, see page 46.

1Main button

Selects the GTP-870HD itself, and sets the re- mote control to the command set associated with the main unit (see page 47).

•In Main mode, pressing any button on the re- mote control will cause the Main button to glow indicating that the GTP-870HD is active.

2Source Selector buttons

•Vid 1~4 - Selects the Video 1, Video 2, Vid- eo 3, or Video 4 input, including the video, audio, and configuration settings associated with that input. Also sets the remote control to the command set associated with that in- put (see page 47).

•CD - Selects the CD input, including all con- figuration settings associated with that in- put. Also sets the remote control to the CD command set (see page 48).

•Tuner - Selects the Tuner input, including all configuration settings associated with that input. Also sets the remote control to the Tuner command set (see page 49).

•Rm 2 - Selects the zone 2 outputs, includ- ing all configuration settings associated with that output. Also sets the remote control to the Room 2 command set (see page 49).

3Power button

Powers the GTP-870HD on and off (Standby).

•The rear panel power switch must be on (1) for this button to function.

4Input Select buttons

•Ext7.1 - Selects the Ext 7.1 inputs, usually connected to a DVD, DVD-Audio, or SACD player.

•Tape - Monitors the Tape output, usually connected to a recording device (e.g., a VCR or tape deck).

5Play button

Programmable button. Can be taught to start playback of the selected source component.

6Arrow buttons

Use to navigate the front panel display and on- screen menus.

7Pause button

Programmable button. Can be taught to pause playback of the selected source component.

80-9, 10+ buttons

Programmable buttons. Can be taught to make direct selections (e.g., of DVD chapters or CD tracks) for the selected source component.

9FM/AM/HD button

In Tuner mode, switches between the FM and AM tuner bands.

10Mem button

In Tuner mode, stores the selected station as a preset.

8GTP-870HD Owner’s Manual