Adder Technology AV Series manual Making standard connections, Connections at the transmitter

Making standard connections

Connections to the AdderLink AV modules do not need to follow the precise order given in this user guide although it is recommended that you do not apply power to the modules until all other connections have been made.

Note: Unless stated otherwise, all connection information given here applies to all modules in the AdderLink AV family.

Connections at the transmitter

To connect video and audio from the source PC system

1Attach a video cable of suitable type and length (fully shielded with 15 way

male D-type connectors at both ends, 2m or less - Adder part number: VSC18) to the socket labelled IN on the AdderLink AV transmitter.

2Attach the other end of the video cable to the appropriate VGA video output socket on the source PC system.

3	Attach a stereo audio cable (shielded with three way
	3.5mm jack plugs at both ends - Adder part
	number: VSC22) to the socket labelled IN	on	ADDERLINK
	the AdderLink AV transmitter.
4	Attach the other end of the stereo
	audio cable to the appropriate
	audio output socket on the	IN
	source PC system.		IN
				4
				10

To connect a monitor and speakers

The video and audio out ports of the AdderLink AV transmitter can optionally be used either to:

•Attach a monitor and/or speakers in the vicinity of the source PC system

– See below,

or

•Make a cascade link to another transmitter module – Please refer to the section Making cascade connections – Cascading transmitters.

1Attach the video cable from the monitor to the socket labelled OUT on the AdderLink AV transmitter.

2Attach the stereo audio cable from the speakers to the socket labelled OUT on the AdderLink AV transmitter.

ADDERLINK
IN
IN	4
	10

T

    

10