Addonics Technologies AD5SAPM manual Gnd Led Key, Contact Us, Phone Fax

Port 2

Port 3

Port 4

Port 5

4-Pin Floppy Power Connector

Host SATA Port

Port 1

Port 1 - 5

+ P S 0 1 2 3 4 H

GND

LED KEY

0-4 Power and Drive Activity LED

HHost Device LED P Power LED

S System Ready LED

Note: When the internal port multiplier (PM) is connected to a SATA Host controller with SiI3124 or SiI3132 chip, in the RAID BIOS of the host controller, you will only see one drive and that is the drive connected to port 1 on the hardware PM.

All the SATA drives connected to the PM will show in the SATARAID5 Array Manager.

1.Mount the internal SATA Port Multiplier onto the PCI bracket of any standard desktop or low profile system.

2.Attach the SATA hard drives (up to 5) to ports 1-5 on the Port Multiplier using SATA cables.

3.Attach a 4-pin floppy power cable from the power supply unit to the Port Multiplier power connecter.

4.Connect a SATA cable to the Host SATA port of the Port Multiplier then to the SATA port of the raid controller.

CONTACT US

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/