Note: Before installing the ADSALVD160, you need to set up the SCSI host adapter first. Once the SCSI host adapter had been configured and detected by the system, you can now follow the instructions below.
Your SCSI host adapter must be terminated.
1.Connect one end of the SCSI cable that is connected to the SCSI host adapter to the
2.Connect the SATA hard drive to the SATA interface on the ADSALVD160.
3.Using the provided
SCSI ID Setting
To change the SCSI ID setting of the SATA hard drive connected to the ADSALVD160 refer below
1 2 3 4 5 6 7 8 | On Off |
| Pins | Pins | Pins | Pins |
ID = 0 | OFF | OFF | OFF | OFF |
ID = 1 | ON | OFF | OFF | OFF |
ID = 2 | OFF | ON | OFF | OFF |
ID = 3 | ON | ON | OFF | OFF |
ID = 4 | OFF | OFF | ON | OFF |
ID = 5 | ON | OFF | ON | OFF |
ID = 6 | OFF | ON | ON | OFF |
ID = 7 |
|
|
|
|
ID = 8 | OFF | OFF | OFF | ON |
ID = 9 | ON | OFF | OFF | ON |
ID = 10 | OFF | ON | OFF | ON |
ID = 11 | ON | ON | OFF | ON |
ID = 12 | OFF | OFF | ON | ON |
ID = 13 | ON | OFF | ON | ON |
ID = 14 | ON | ON | ON | OFF |
ID = 15 | ON | ON | ON | ON |
CONTACT US
www.addonics.com
Phone: 408-573-8580
Fax:
Email: http://www.addonics.com/sales/query/