SETUP WIZARD

ADSL Setting

Select your Country and Internet Service Provider. This will automatically configure the Barricade with the correct Protocol, Encapsulation and VPI/VCI settings for your ISP.

If your Country or Internet Service Provider is not listed in this screen, you will need to manually enter settings. Go to “Parameter Setting - Country or ISP Not Listed” on page 4-10in the manual.

If your ISP uses Protocols PPPoA or PPPoE you will need to enter the username, password and DNS Server address supplied by your ISP.

If your ISP uses Protocol RFC1483 Routed you will need to enter the IP address, Subnet Mask, Default Gateway and DNS Server address supplied by your ISP.

Note: If your ISP has not provided you with a DNS address and the protocol is PPPoA, PPPoE or 1483 Bridging, you can leave this field blank. The Barricade will then automatically obtain the DNS address.

Click NEXT to continue.

4-5

Page 41
Image 41
SMC Networks SMC7908VoWBRA2 manual Adsl Setting