C
ONFIGURING
THE
V
OICE
ADSL R
OUTER
4-10
If the parameters are correct, click FINISH to save these settings.
Your Barricade is now set up. Go to “Troubleshooting” if you cannot
make a connection to the Internet.
Parameter Setting - Country or ISP Not Listed
If your Country or Internet Service Provider is not listed, select Others.
This will allow you to manually configure your ISP settings.
For manual configuration you will need to know the Protocol, DNS
Server, Encapsulation and VPI/VCI settings used by your ISP. If you have
a Static IP address you will also need to know the IP address, Subnet Mask
and Gateway address. Please contact your ISP for these details if you do
not already have them.
After selecting Other you will be required to select the Protocol that your
ISP uses from the drop-down list.