ADVANCED SETUP

Parameter Description

IP Address Pool

Start IP Address Specify the start IP address of the DHCP pool. Do not include the gateway address of the Barricade in the client address pool. If you change the pool range, make sure the first three octets match the gateway’s IP address, i.e., 192.168.2.xxx.

End IP Address Specify the end IP address of the DHCP pool.

Domain Name If your network uses a domain name, enter it here. Otherwise, leave this field blank.

VLAN

The Barricade’s VLAN function can be used to create up to 4 VLAN profiles. Once a VLAN profile is created interfaces can be assigned to the VLAN profile. This is done by setting the VLAN binding.

Notes: Only interfaces of IEEE 802 bridging type (LAN ports 1-4 and 1483 Bridging PVC’s) can be assigned to a VLAN.

Click Add VLAN to create a profile.

4-33

Page 69
Image 69
SMC Networks SMC7908VoWBRA2 manual Vlan