Addonics Technologies Model RCHDSAES, For External Application, eSATA cable Power adapter

Model: RCHDSAES

*Note: The Ruby combo hard drive with the eSATA interface must be connected to a SATA controller with hot swap capability in order to add and remove drive cartridge without rebooting. Please consult your motherboard or the add-in card manufacturer to determine hot swap support on your SATA controller. All of the Addonics SATA Host Controllers are hot swap capable.

For External Application:

eSATA cable

Power adapter

Step 1: Connect the eSATA cable to the eSATA port at the back of the enclosure. The other end of the cable connects to an eSATA host controller.

Step 2: Plug into the power jack located at the back of the enclosure, the power adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate power is provided to the drive.

Model: RCHDSAEU

For External Application:

eSATA cable

Power adapter

Step 1: Connect the eSATA cable to the eSATA port at the back of the enclosure. The other end of the cable connects to the eSATA port on the USB2.0 to eSATA adapter. Plug the adapter to a USB port on your system.

Red LED showing adapter access

eSATA cable from	USB Port
Ruby enclosure

Green LED showing adapter connectivity

Step 2: Plug into the power jack located at the back of the enclosure, the power adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate power is provided to the drive.