ADIC FileServ Version 4.4.1601363 manual

If you are adding an AIT-2 drive, update the DEF_MED_SPC_AIT parameter definition to be as shown below if you are using 230m tape:

DEF_MED_SPC_AIT=50000000000;

If you are adding an 3590E1A drive, update the DEF_MED_SPC_3590 parameter definition to be as shown below:

DEF_MED_SPC_3590=20000000000;

If you are adding a DLT 7000 drive, update the DEF_MED_SPC_CTIV parameter definition to be as shown below:

DEF_MED_SPC_CTIV=35000000000;

If you are adding a DLT 8000 drive, update the DEF_MED_SPC_CTIV parameter definition to be as shown below:

DEF_MED_SPC_CTIV=40000000000;

Step 4. Save the changes and quit the edit session.

Modify IRIX Kernel for SONY DTF-2 Drive

IRIX only: Update the SGI kernel to be aware of the SONY DTF-2 drive, by following the steps below:

Step 1. Log in as root.

#su root

Step 2. Search the scsi file and look for the words “GY-8240.”

#vi /var/sysgen/master.d/scsi

Step 3. If that text is not found, add the following entry to the file for your drive:

/* SONY GY-8240 drive */

{SONYGY, TPGY2120, 4, 7, "SONY", "GY-8240", 0, 0, {0, 0, 0, 0},

MTCAN_BSFMTCAN_BSRMTCANT_RETMTCAN_CHKRDYMTCAN_PREV MTCAN_SEEKMTCAN_APPENDMTCAN_SILIMTCAN_VARMTCAN_SETSZ MTCAN_CHTYPEANY MTCAN_COMPRESS,

20, 100*60, 10*60, 9*60, 9*60, 16384, 256*1024,

tpsc_default_dens_count, tpsc_default_hwg_dens_names, tpsc_default_alias_dens_names,

{0}, 0, 0, 0,

0, (u_char *)0 },

www.adic.com

FileServ Version 4.4.1—601363 Rev A

Page 5 of 16