– 6 –
6\VWHP2YHUYLHZ&RQWLQXHG
Zones and Partitions
•The system sensing devices have been assigned to various “zones,” which are
specific areas of protection (e.g., front door, kitchen window, etc.).
•Zone numbers are displayed at the touchpad when an alarm or trou ble condition
occurs on a sensor.
•Partitions provide two independent areas of protection, with each partition
containing a group of zones that can be armed and disarmed without af fecting
other zones or users.
•Partitioned systems can include a common zone area, which is an area shared by
users of both partitions (such as a lobby in a building).
•Partition identification: 1 = partition 1; 2 = partition 2; 3 = commo n zone.
Arming, Step-Arming and Disarming Burglary Protection
•The system must be armed before the burglary protection can sense intrusions.
•To arm your system, enter your user code followed by the desired arming key.
•If programmed, the [#] key can be pressed instead of entering the security code
when arming the system.
•You can also use the step-arming key to arm the system, if programmed.
•To disarm the system, enter your user code then press the [OFF] key.
•Step-arming, if programmed, lets you use a function key to arm the system in one
of three modes by simply pressing the key repeatedly, where:
first press arms STAY; second press arms NIGHT-STAY; third press arms
AWAY.
Alarms
•When an alarm occurs, both the touchpad and external sounde rs will sound, and
the touchpad will display the zone(s) causing the alarm.
•If your system is connected to a Customer Care Center, an alarm message will
also be sent.
•To stop the alarm sounding, simply disarm the system.
Memory of Alarm
•When an alarm condition occurs, the touchpad displays the number(s) of the
zone(s) that caused the problem, and displays the type of alarm (e.g., “FIRE”).
•The message remains displayed even after di sarming the system, but can be
cleared with another “off” sequence.
Function Keys
•The “A”, “B”, “C”, and “D” keys on the touchpad ca n be programmed to perform
various functions.
•Functions include: activate a Panic alarm; arm the system; provide step arming;
switch lights on/off; send a message to a pager; display Time/Date ; start a Macro