Exiting with the System Already Armed | ADT Security Services EZ

EXITING WITH THE SYSTEM ALREADY ARMED

If the system is Armed STAY and you are leaving with other family members remaining home:

1	Press the STAY button.

ARMED

STAY

The ARMED indicator will light and STAY will begin to flash, indicating the 60 second exit delay period.

2	Unlock the deadbolt from the inside. System will disarm.

3	Open the door and exit.

4	Lock the deadbolt from the outside to arm the system.
	If the deadbolt has not been locked within 60 seconds of pressing STAY, the system will
	revert back to a disarmed state.

10

Image 10

ADT Security Services EZ manual Exiting with the System Already Armed

Contents

ADT Introduction Please read it through and retain it for Table of Contents EZ Touchpad Indicators TBL EZ Touchpad Controls Emergency Buttons Press the Away button Arming When LeavingOpen the door and exit Press either the Stay or Away button Bypassing Faulted ZonesPress the Bypass button If arming AWAY, open the door and exit Arming When Staying Home Press the Stay button Arming and Leaving with Others Staying Exiting with the System Already Armed Unlock the deadbolt from the inside. System will disarm Indicate the system has armed Emergency Buttons Disarming when home Armed Stay Disarming when returning homeDisarming the System If an alarm occurs while you are at home Silencing AN AlarmIf an alarm occurs while you are away Fire Protection Fire Family Rehearsal Would You Like More Safety Information?Preparing a Fire Escape Plan Important! Read Carefully System Trouble Error Codes Ready Detector Supervisory Failure Zone List Adding additional IFOBs to your system Enrolling a NEW EZ IfobRemoving IFOBs from the system Lost KEY Mode Lost Key Mode Federal Communications Commission FCC Part 68 Statement Page Page Limited Warranty Terms and Conditions Applying to Sale of Equipment ALL Rights Reserved Following Statement is Required by the FCC