Advantech MIC-3043 user manual 5IDE adaptor type B, 6 The location of jumper switch

Figure 2.5:IDE adaptor (type B

2.3.7Configuring the built-in SATA for the RIO module (MIC-3043D series)

MIC-3043D has SATA versions that support a removable or hot-swappa- ble HDD which depends on RIO module type. Hot-swappable mode must use RIO module supporting SATA interface; conversely, IDE interface is only for removable. The default setting is through IDE interface. There is a DIP switch on HDD backplane for IDE/SATA selection. An illustration of the switch location is shown in Figure 2-6 as below.

Figure 2.6: The location of jumper switch

Figure 2.7: Setting table for IDE/SATA selection

MIC-3043 User Manual 14