MIC-3081 User Manual --- Page 3
backplane may be configured for +3.3V or +5V V(I/O) CompactPCI device support.
A short-bar is provided on the backplane to select the desired V(I/O) voltage. The
eight rear I/O are provided directly behind the backplane for IEEE1101.11
specification, 80mm depth transition board. Slot 8 is dedicated to the system
master, and slot #1 through #7 are available for additional rear I/O boards.
10U-High CompactPCI™ Enclosure with 8-slot Backplane
There are two MIC-3081 models:
• MIC-3081A/8-4R: MIC-3081 clone system, w/ 8-slot CompactPCI™ 6U
backplane (MIB-3021CT), advance intelligent alarm module (MIC-3921)
• MIC-3081B/8-4R: MIC-3081 clone system, w/ 8-slot CompactPCI™ 6U
backplane (MIB-3081A), chassis management module (MIC-3924A)
• 10U-high enclosure, 19-inch enclosure
• 8-slots 6U CompactPCI backplane
• Supports rear I/O
• H. 110 CT bus compliant (PICMG 2.5)
• 460W single ATX or 560 W N+1 redundant ATX power supply
• Hot swappable fan modules and blowers
• Advance intelligent alarm module / chassis management module as option
• Device bay accommodates up to three devices
1.3.1 General
• 6U Slot: 6U CompactPCI x 8, transition x 8 (80mm, IEEE1101.11 compatible)
• Bus: 32-bit/33MHz, 64-bit/66MHz
• VI/O Voltage: 3.3 V/5 V (short-bar selectable)
• Fan: 2 (163 CFM/each, 15 cm) on the chassis bottom (Inlet)
• Blowers: 2 (40 CFM/each, 12 cm) on the chassis top (Outlet)
• Power Requirement Input: AC 100-240V @ 47-63 Hz, full range
• Safety: CE, TUV, CUL, UL
• Dimensions (W x H x D, mounting flanges not included): 444 x 446 x 342 mm
(17.48” x 17.56” x 13.46”)
• Weight: 18 kg (39.65 lb)
• Serviceability MTTR: 5 minutes
• Standard: PICMG 2.0, R3.0 CompactPCI specifications