Advantech SPC-530 user manual Installing the power supply unit, ATX redundant power supply

Models: SPC-530

1 17

Page 11

There is one 400 W ATX redundant power supply installed at the front of the chassis. The power module can be hot-swapped for maintainence.

Image 11

Contents

Rackmount Server PC SPC-530Users Manual Printed in Taiwan Copyright NoticeAcknowledgments 1st EditionContents System SetupChapter General Information1.2 Model list 1.3 SpecificationsChapter 1 General Information 1.1 Introduction Passive backplane options for SPC-530BP / SPC-530BP-U2C Hot-swap AC-DC 400-watt ATX redundant power supply RPS-400ATXRAID card features only for SPC-530BP-U2C / SPC-530MB-U2C Relative humidity 20 to 90% CE compliantControls for the system Fault detection and alarm notificationUnit = mm 1.4 DimensionsSPC-530BP Can be fitted with a 20-slot backplane SPC-530MB Can be fitted with a 12 x 13 motherboardWARNING Disconnect all power from the chassis before you install Chapter 2 System Setup2.1 Removing the cover 2.3 Cooling fans 2.2 Removing the handles2.3 The cooling fans 2.2 Removing the handles2.4 Removing the disk drive bay 2.4 Installing the disk drives2.5 Temperature setting 2.6 Alarm board8 SPC-530 Users Manual 2.6 Installing the power supply unit2.7 ATX redundant power supply Signals Appendix A Backplanes OptionalDimensions 420 x 260 mm Termination resistor signals Signals10 SPC-530 Users Manual Dimensions 420 x 260 mmPCA-6119P7 Rev. A1 15 ISA / 4 PCI / 1 PICMG-slot passive backplane SPC-530 Users Manual Dimensions 420 x 260 mmPCA-6119P17 Rev. A1 1 ISA / 17 PCI / 1 PICMG-slot passive backplane 12 SPC-530 Users Manual Appendix B Exploded DiagramsSPC-530MB SPC-530 Users Manual SPC-530BPAppendix C Safety Instructions