Install the Adrenaline Hardware Accelerator | Ricoh G413 guide

VRS Getting Started Guide

Step 2. Install the Adrenaline Hardware Accelerator

This section explains how to install the Adrenaline Hardware Accelerator.

Note: To run VirtualReScan successfully, you need to install only the software provided on the VRS installation CD. Do not install the software provided on the Adrenaline Hardware Accelerator CD.

Compatibility with Current Accelerators and Engines

We recommend that you install the Adrenaline Hardware Accelerator on a PC with no other Kofax hardware accelerators. If necessary, remove the older Kofax accelerators before you install the Adrenaline Hardware Accelerator.

Precautions

When handling your Adrenaline Hardware Accelerator, follow these precautions:

•Keep the accelerator in its original shipping package until you are ready to install it.

•Power off your PC before installing the accelerator.

•Before handling the accelerator, discharge static electricity from yourself and the work area by touching the metal chassis of the PC.

•Hold the accelerator by the edges; do not touch its metal surface.

Before installing the accelerator, make sure your PC is powered off. Then, install the accelerator in any available PCI slot. Be sure to use the screws to secure it into place.

Figure 5. Installing an Adrenaline Hardware Accelerator in Your PC

Kofax Image Products

5

Image 9

Ricoh G413 Install the Adrenaline Hardware Accelerator, Compatibility with Current Accelerators and Engines, Precautions

Contents

Ricoh Copyright Contents VRS Getting Started Guide Product Overview Introduction VRS Product Package System RequirementsScanner Installation Install the SoftwareTo install the VRS software Setup Complete Dialog Box Install the Adrenaline Hardware Accelerator PrecautionsCompatibility with Current Accelerators and Engines Connect PC to Scanner Configure the Accelerator Windows Kofax Configuration Manager KCM Dialog Box Configure the Accelerator Windows NT To connect the scanner to your PC Attach Your Scanner To start VRS Starting VirtualReScan Opening the VRS Menu First Time CalibrationTo open the VRS menu Select Source, Properties VRS Getting Started Guide Reset ConfigurePreview Profile Cause Defining Exception Conditions Brightness Out of Range Threshold Selecting the ThresholdContrast Out of Range Threshold Missing Corner Threshold Selecting an Action Errors Tab Action Options Error Description Action Type Description To define exception condition parameters VRS manual mode only Rescan manual mode onlyIgnore manual mode only Auto Resolve check box Stop on Errors Selecting a ModeStop Every Stop on First VRS Viewer with the VRS Interactive Properties Dialog Box Updating Image Properties Using the VRS Viewer Using the Zoom Menu to adjust the viewUsing mouse buttons to adjust the view VRS Interactive Properties Dialog Box Tabs Using the VRS Interactive Properties Dialog Box VRS Interactive Properties Dialog Box Buttons Brightness and Contrast Using the Clarity TabBrightness and Contrast Visual Markers Black Lines Blue Rectangle To change the Clarity settingsDotted Red Lines Gamma To change the Noise settings Using the Noise Tab VRS Getting Started Guide Skew Tab Using the Skew Tab To change the Skew tab settings To set up a profile Using the Profiles Tab To remove a profile from the Available Profiles list To change the active profile Using the Options Tab Automatic DeskewImage Crop Accelerated Scanning Intelligent Contrast Adjustment / Brightness AdjustmentVRS Refresh To change the selections on the Options tab Analysis Tab Using the Analysis Tab About Tab Using the About Tab To preview an image Previewing Images To reset the VRS configuration Resetting VRS Headquarters European Headquarters Technical SupportPage Index Kofax Image Products VRS Getting Started Guide