VRS Getting Started Guide | Ricoh G413 instruction

VRS Getting Started Guide

6.If Calibration is successful, the display windows will be visible as in the example to the right.

7.Select Source, Scanner from the pull-down menu in preparation for an ADF scan.

8.A Window will display stating that the source is already in use, click on Yes to change.

9.Select Ricoh VirtualReScan Source, then click on OK.

12	Kofax Image Products

Image 16

Ricoh G413 operating instructions VRS Getting Started Guide

Contents

Ricoh Copyright Contents VRS Getting Started Guide Introduction Product Overview System Requirements VRS Product PackageScanner Install the Software InstallationTo install the VRS software Setup Complete Dialog Box Precautions Install the Adrenaline Hardware AcceleratorCompatibility with Current Accelerators and Engines Configure the Accelerator Windows Connect PC to Scanner Configure the Accelerator Windows NT Kofax Configuration Manager KCM Dialog Box Attach Your Scanner To connect the scanner to your PC Starting VirtualReScan To start VRS First Time Calibration Opening the VRS MenuTo open the VRS menu Select Source, Properties VRS Getting Started Guide Configure ResetPreview Profile Defining Exception Conditions Cause Selecting the Threshold Brightness Out of Range ThresholdContrast Out of Range Threshold Missing Corner Threshold Errors Tab Selecting an Action Error Description Action Options To define exception condition parameters Action Type Description Rescan manual mode only VRS manual mode onlyIgnore manual mode only Auto Resolve check box Selecting a Mode Stop on ErrorsStop Every Stop on First Updating Image Properties VRS Viewer with the VRS Interactive Properties Dialog Box Using the Zoom Menu to adjust the view Using the VRS ViewerUsing mouse buttons to adjust the view Using the VRS Interactive Properties Dialog Box VRS Interactive Properties Dialog Box Tabs VRS Interactive Properties Dialog Box Buttons Using the Clarity Tab Brightness and ContrastBrightness and Contrast Visual Markers Black Lines To change the Clarity settings Blue RectangleDotted Red Lines Gamma Using the Noise Tab To change the Noise settings VRS Getting Started Guide Using the Skew Tab Skew Tab To change the Skew tab settings Using the Profiles Tab To set up a profile To change the active profile To remove a profile from the Available Profiles list Automatic Deskew Using the Options TabImage Crop Intelligent Contrast Adjustment / Brightness Adjustment Accelerated ScanningVRS Refresh To change the selections on the Options tab Using the Analysis Tab Analysis Tab Using the About Tab About Tab Previewing Images To preview an image Resetting VRS To reset the VRS configuration Technical Support Headquarters European HeadquartersPage Index Kofax Image Products VRS Getting Started Guide