VRS Getting Started Guide
10.Engine Load Window will display and disappear when successfully loaded.
VRS Menu Commands
The VRS menu consists of the following commands:
Preview
Use this command to open a sample image, so that you can test image property settings. For more information, see the section Previewing Images on page 37.
Profile
Use this command to select a profile, which consists of
Mode
Use this command to select an operating mode, which determines the conditions under which the VRS user interface opens during a scanning session. For more information, see the section Selecting a Mode on page 20.
Configure
Use this command to open the VRS Administration Utility dialog box, which is used to define exception condition parameters. For more information, see the section Defining Exception Conditions on page 14.
Reset
Use this command if you are instructed by authorized technical support personnel to reset the configuration for the Adrenaline Hardware Accelerator. For more information, see the section Resetting VRS on page 38.
Kofax Image Products | 13 |
