VRS Getting Started Guide
Table 4. Invalid Characters for Profile Names
Character | Description | Character | Description |
|
|
|
|
: | Colon | ' | Single quotation |
|
|
|
|
; | Semicolon | " | Double |
|
|
| quotation |
|
|
|
|
\ | Backslash | > | Greater than |
|
|
|
|
/ | Slash | < | Less than |
|
|
|
|
Pipe | ^ | Caret | |
|
|
|
|
& | Ampersand | . | Period |
|
|
|
|
? | Question mark |
|
|
|
|
|
|
!To change the active profile
1 From the VRS Interactive Properties dialog, select the Profiles tab. 2 From the Available Profiles list, select the profile you want to use.
3 Select the Load button.
Note: If an image is open in the VRS Viewer when you change the active profile, the image is refreshed with the new settings.
or
1From the VRS Interactive Properties dialog, select the Profiles tab.
2From the Available Profiles list,
1From the VRS menu, select the Profiles command.
2When the Profiles submenu opens, select the name of the profile you want to use.
Note: If you change the active profile, it stays in effect for the current VRS session. Each time you start VRS, Default settings is reset as the active profile.
!To remove a profile from the Available Profiles list:
1From the VRS Interactive Properties dialog box, select the Profiles tab.
2From the Available Profiles list, select the profile(s) you want to remove.
3Select Remove. The profile name clears from the Available Profiles list.
32 | Kofax Image Products |
