Ricoh G413 To define exception condition parameters, Action Type Description

VRS Getting Started Guide

Table 3. Action Types

Action Type	Description
Return Error	Pass error (without the image) to the host application.
Ignore Error	Accept image "as is," pass it to the host application, and resume the
	scanning session.
Intervention	Open the Auto Resolve Manager in manual mode. As a result, the
	user is presented a range of options for handling the error. See the
	next section, Using the Auto Resolve Manager.
Auto Resolve	Opens the Auto Resolve Manager in automatic mode. As a result, the
	scanner automatically attempts to retry the scan until the user
	resolves an equipment or paper transport impediment, such as a loose
	cable, paper jam, or out of paper condition. See the next section, Using
	the Auto Resolve Manager.
Interactive	Opens the VRS Interactive Properties dialog box and displays the
	image in the VRS Viewer, so that the user can apply new settings to
	the current image. The dialog box opens to the tab that relates to the
	warning condition. For example, if a Brightness Out of Range
	warning occurs, the dialog box would open with the focus on the
	Clarity tab, where the brightness setting can be adjusted.

!To define exception condition parameters

1 From the Windows taskbar, right-click on the VRS icon to open the VRS menu.

2 From the VRS menu, select Configure to open the VRS Administration Utility dialog box.

3Select one of the following tabs: a Warnings tab

The Warnings tab gives you options to set the threshold and response for exceptions related to image quality, as listed in Table 1 on page 14.

bErrors tab

The Errors tab gives you options to set the response to exceptions related to equipment conflicts and paper transport errors, as listed in Table 2 on page 17.

4Adjust the settings for each tab. a Warnings tab - Threshold

From the Warnings tab, you can type directly into the Threshold box, or click the arrows to select a new threshold setting. For more information about thresholds, see the section Warnings Tab on page 14.

bWarnings tab/Errors tab - Action

From the Warnings tab and the Errors tab, define a VRS response to each exception type by clicking in the Action box and selecting from the drop-down list. For details, see Action Options on page 17.

5Once you are satisfied with the settings, click Save.

18 Kofax Image Products