3
• Vibration Protection: IEC 68 2-64 (Random 1 Oct./min, 1hr/axis),
CompactFlash: 2Grms@ 5~500Hz, (Optional, UNO-1170E only)
HDD: 0.5 Grms @ 5~500Hz
• Power Supply Voltage: 10-36 VDC, reversed wiring protection
• Power Requirement: Min. 48 W (10 ~ 53 VDC) (e.g +24 V @ 2 A) (ATX)
• Power Consumption: 24W (Typical)
• Operating Temperature: -20~60° C (-4~149° F)
• Storage Temperature: -20~80° C (-4~176° F)
• Relative humidity: 95% @ 40°C
• Weight : 1.6KG (for UNO-1170) 2.0KG (for UNO-1170E)
• Chassis size (W × L × H): 85x155x140 mm (3.4"x 6.1"x 5.6") (UNO-1170)
110 x 155 x 140 mm (4.4" x 6.1" x 5.6") (UNO-1170E)
• Software options: WinXP Embedded, Win CE, Linux
• Certification: CE, FCC Class A, UL
1.3 Safety Precautions
The following sections tell how to make each connection. In most cases, you
will simply need to connect a standard cable. All of the connector pin assign-
ments are shown in Appendix A.
Warning!! Always disconnect the power cord from your chassis when
you are working on it. Do not connect while the power is
on. A sudden rush of power can damage sensitive elec-
tronic components. Only experienced electronics person-
nel should open the chassis.
Caution!! Always ground yourself to remove any static electric
charge before touching UNO-1170. Modern electronic
devices are very sensitive to static electric charges. Use a
grounding wrist strap at all times. Place all electronic com-
ponents on a static-dissipative surface or in a static-
shielded bag.