Advantek Networks ANS-08P manual Front panel LED indicators, Rear panel ports, Power Connecting

Front panel LED indicators

After installing the switch, you can check its status from the LED indicators on the front panel

shown below.

Front View

LED	Color	Status	Indication
POWER (PWR)	GREEN	ON	The switch is power on
		OFF	The switch is power off
LINK / ACT	GREEN	ON	A link is established
		BLINKING	A link is established and data is being
			transmitted or received

Rear panel ports

Back Panel

Ports 1x - 8x :The switch has eight 10/100Mbps RJ-45 ports where you can connect computers or network devices to the switch.

AC IN : This port connects the AC power adapter.

Power Connecting

Plug the circle end of the power adapter firmly into the power port on the switch rear panel, and the other end into an electric service outlet, then the system is ready.

Connecting computers to the switch

The switch features auto-MDI/MDIX crossover detection function and provides plug-and-play capability. Users can immediately use any of the features of this product simply by plugging the network cables (RJ-45) into the computers and the switch.