Panasonic SA-HE100 Step Others Reference, Before use Step Step, Digital Input, For your reference

VOLUME			INPUT
TAPE	VCR1/VCR2	TV	DVD	CD	TUNER PHONO
(MONITOR)
				INPUT SELECTOR
					DIGITAL INPUT
UP
		TAPE MONITOR		SUBWOOFER	DVD 6CH INPUT

BASS/TREBLE	3	4	VCR1 l
BALANCE	L	R	VCR2 k

VCR2

Volume control [VOLUME]

Input indicators [INPUT]

Digital/analog input select button/indicator

[DIGITAL INPUT]

For switching between analog and digital input when you have selected TV, CD, or DVD. The button lights when digital is selected.

Input selector [INPUT SELECTOR]

DVD 6ch/2ch input select button/indicator [DVD 6CH INPUT]

For switching between 6-channel and 2-channel DVD input. The button lights up when DVD 6CH INPUT is selected.

Subwoofer level button [SUBWOOFER]

Adjust the level in 5 steps

SW MIN, SW 5, SW 10, SW 15, and SW MAX.

Select SW --- to stop output.

VCR 1/VCR 2 select button [VCR 1 l, VCR 2 k]

Before use

Step 1

Step 2

	VCR 2 terminals [VCR 2]
VIDEO IN L AUDIO IN R
	Tone/balance adjust buttons
	[BASS/TREBLE, BALANCE, –, +, L, R]
	For adjusting the tone and balance.
Tape monitor button [TAPE MONITOR]	First select BASS, TREBLE, or BALANCE, then press [–, L] or [+, R]
For monitoring sound when recording to a 3 head cassette deck.	to adjust.
Also used when you have connected a graphic equalizer to the TAPE
terminals.

Step 3

Program format indicators [L, C, R, S, SL, SB, SR, LFE]

Show the channels contained in the digital input signal. They do not light when input is analog.

L:Front left channel

C:Center channel

R:Front right channel

S:If the surround channel is monaural. SL: Surround left channel

SB: Surround back channel

SR: Surround right channel

LFE (Low Frequency Effect): Deep-bass effect.

Signal and decoding format indicators

[FIX, % PRO LOGIC 2, PCM, NEO:6, , ES, % DIGITAL]

Light to indicate the source’s input signal and decoding format used.

%DIGITAL: Dolby Digital sources : DTS sources

ES: DTS-ES sources

NEO:6: The DTS NEO:6 circuit is being used

%PRO LOGIC 2: The Dolby Pro Logic 2 circuit is being used FIX: PCM FIX or DTS FIX mode

PCM: PCM FIX mode

For your reference

¡When playing videotapes

The picture remains on the screen even if you select TAPE, CD, TUNER or PHONO.

¡Once you have set a mode (DSP, digital/analog input, or 2-channel/6-channel input) for an input source

That mode is engaged whenever you reselect the input source. ¡When DVD 6CH INPUT is on

Speaker settings are ineffective. Change the settings on the DVD player if necessary.

¡When input is DIGITAL

The tape monitor cannot be used.

¡When using a graphic equalizer

Some distortion may occur, depending on the equalizer’s settings.

¡To adjust the tone

The STEREO DSP mode must be on and input must be either analog or PCM signals. You cannot adjust the tone while the DSP is defeated or if DVD 6CH INPUT is selected.

¡When using the subwoofer

You cannot adjust subwoofer level while the DSP is defeated or if DVD 6CH INPUT is selected.

Sound can be distorted if you raise the volume while subwoofer level is high. Reduce subwoofer level if this occurs.

¡When SPEAKERS B is on

The STEREO DSP SOUND mode is engaged automatically. ¡When DTS FIX mode is on

You cannot use ENHANCED SURROUND and DTS-ES signals will be played through 5.1 channels (i.e., there will be no sound from the surround back speaker).

Step 4

Others

Reference

13

RQT6208