JVC AV-21QT4SJ manual Install Installation Menu, Blue Background During No-Signal

%/8(6((3&+,/'/(;7$1*8*(￿￿￿￿%￿287387￿/2&7,0(5$&..*5281' 2))(1*/,6+79

Blue Background During No-Signal

The Blue Background feature can be set by “” or “” button to either On or Off.

Install (Installation) Menu

You can store a channel manually, or modify the current set- tings of a channel (for example, fine-tuning a channel).

You can also changing the colour system, or change the DECODER(EXT-2) setting.

•Press “MENU” button to display the main menu.

•Press “” or “ ” button to select “INSTALL” item. Then “” or “” button to,16352*5)(6281',&(display$785($//￿￿￿￿￿￿$0￿￿￿the “INSTALL” menu.

Note:

•If you want to modify the current settings of a channel, se- lect the channel of which you want to modify the setting. Then display the main menu on screen.

•In AV mode, you can change only the “COLOUR SYSTEM” item.

1.PROGRAMME will be the first selected item as you enter

the INSTALL menu. Pressing “” or “” button select the programme number where you want to the tuned channel to be stored. (You may also type the programme number using the digit buttons.)

Note:

•Do not use PROGRAMME item when you modify the cur- rent programme number’s setting. If you select other programme number by mistake, the selected programme number’s setting will be changed.

2.Press “” or “” button to select BAND. Using “” or “” button to select the band in which you want to search a channel.

3. Press “” or “” button to select SEARCH. Press “” or “” button to start searching. (Press “” button to search forward. Press “” to search backwards.)

•If the found channel is not the desired one, press “” or “” button to start searching again.

•To stop searching before a channel is found, press the reverse direction button. For example, when the TV is

searching forward with “” button, press “” button to stop searching.

•If you know the channel number which you want to find, you can find the channel directly. Follow the step 4 to

select the correct standard, then press “” or “” to select CHANNEL again, and press “” or “” button to select the channel number, or enter the number with the digit buttons.

4.If the picture is not clear or no colour appears, change the colour system to display the picture normally. Press

“” or “” button to select COLOUR SYSTEM, then press “” or “” button to choose the correct one.

•In TV mode: PAL / SECAM

•In AV mode: AUTO / PAL / SECAM / NTSC 3.58 / NTSC 4.43

5.If the channel reception is poor, fine-tune the channel.

Press “” or “” to select FINE TUNING, then press “” or “” button to fine-tune the channel.

6.After the all settings are completed, store the new channel’s setting to the programme number which you se-

lected. Press “ ” or “ ” to select STORE, then press “” or “” button to store it. “T-V LINK” menu will ap- pear after the TV stores the settings.

7.If you do not have a T-V LINK compatible VCR, press “PICTURE” button to exit the menu.

If you have a T-V LINK compatible VCR connected to the EXT.2 terminal, follow the operating procedure “Down- loading the data to VCR” on page 6 to transmit the Pro- gramme table data to the VCR.

To change the Colour system:

If the picture is not clear or no colour appears, choose the correct colour system to display the picture normally.

1.Press “ ” or “” button to select COLOUR SYS- TEM, then press “” or “” button to choose the correct one.

•In TV mode: PAL / SECAM

•In AV mode: AUTO / PAL / SECAM / NTSC 3.58 / NTSC 4.43

2.Press “” or “” to select STORE, then press “” or “” button to store it.

3.When “T-V LINK” menu appears, follow the step 4.

ENGLISH - 10 -