Installation
Unpacking
All transit bolts and packing must be removed before using the appli- ance.
Using a spanner,
unscrew and remove the 2 rear
bottom screws. Slide out the 2 plastic pins. Lay
the machine on
its back, taking 025 care not to squash
the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.
Remove the polystyrene block from the bottom of the machine and release the two plastic bags.
Carefully slide out the
and then down- wards.
Slide out the right- hand bag removing it towards the left and then upwards. Set the machine
upright and | P1126 |
| |
remove the |
|
remaining rear |
|
screw. Slide out |
|
the relevant pin. |
|
Plug the open |
|
holes with the |
|
plugs which you |
|
will find in the | P1128 |
plastic bag containing the instruction booklet.
P0001
1 2
3
P1124
P1127 
P0002
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
46
