Kyocera FS-1300D, FS-C5400DN, FS-1100 manual Installing the Memory Modules, Removing a Memory Module

Installing the Memory Modules

IMPORTANT Remove any USB memory that is attached to the printer's USB memory slot.

1 Power off the printer and unplug the printer power cord.

2 Unscrew two screws at the back of the main controller board.

3 Pull out the main controller board gently.

Main Controller Board

4Remove the memory module from its package. Aligning the cutouts of the memory module with the matching keys of the socket, carefully

plug the memory module into the memory socket until it clicks in place.

CAUTION Do not plug the memory module backwards.

5Push down the memory module to secure.

6After you finish installing the memory modules, reinstall the main controller board and fasten it with screws.

Removing a Memory Module

To remove a memory module, remove the main controller board, then carefully push out the two socket clamps. Ease the memory module out of the socket to remove.

A-7