Kyocera FS-C5400DN, FS-1300D, FS-1100 manual Toner Kits

Toner Kits

For best results, we recommend that you only use genuine Kyocera Mita Parts and Supplies. Should any damage be caused by the application of a toner other than the original Kyocera Mita toner, then this damage is excluded from the guarantee.

The toner kits are supplied in 4 different colors: cyan, magenta, yellow and black.

A new toner kit for each color contains the following items:

•Toner Container

•Plastic waste bags for old toner container and old waste toner box

•Waste Toner Box

•Installation Guide

Note Do not remove the toner container from the carton until you are ready to install it in the printer.

Understanding Messages Requesting Toner Container Replacement

The printer displays messages for individual colors at two stages of toner usage. This message is automatically alternated with the other printer message (such as Ready to print.):

•When the printer becomes low on toner, for example in the cyan container, the printer displays the message Replace toner. [C] as the first caution. Note the replacement is not always necessary at this stage.

•If you ignore the above message and continue printing, the printer displays the message Toner empty. — just before the toner is used up. The toner container must be replaced immediately. Clean the separate charger wires, etc. After the cleaning is finished, however, the message does not automatically change to Ready to print. To restart printing, you must press [OK] and make the printer ready.

In either case, replace the toner container, refer to Toner Container Replacement on page 5-2.

Maintenance 5-3