Kyocera FS-C5400DN, FS-1300D, FS-1100 manual Setting the Paper Thickness, Media Type, Paper Weight

Setting the Paper Thickness

You set the paper thickness by selecting a paper weight.

The available paper weights are as follows (grammages are provided as a guide)

Extra Heavy (OHP) Heavy 3 (170 to 220 g/m2) Heavy 2 (135 to 170 g/m2) Heavy 1 (120 to 135 g/m2) Normal 3 (90 to 120 g/m2) Normal 2 (75 to 90 g/m2) Normal 1 (64 to 75 g/m2) Light (60 to 64 g/m2)

The default setting is Normal 2 for plain paper. When using any paper other than plain paper, you should change the paper weight referring to the table below to achieve the best possible print quality for each paper.

Media Type	Paper Weight
Plain	Normal 2
Transparency	Heavy 2
Rough	Normal 3
Vellum	Light
Labels	Heavy 1
Recycled	Normal 2
Preprinted	Normal 2
Bond	Normal 3
Cardstock	Heavy 2
Color	Normal 2
Prepunched	Normal 2
Letterhead	Normal 2
Envelope	Heavy 3
Coated	Normal 3
Thick	Heavy 2
HighQuality	Normal 3
CUSTOM1 to 8	Normal 2

Use the procedure below to set the paper weight.

(For the procedure for setting weights for custom paper (CUSTOM 1 to 8), refer to Custom Paper Settings on page 4-42.)

Using the Operation Panel 4-41