Kyocera FS-1100, FS-C5400DN, FS-1300D Error Handling: a b 1DuplexPaperError, 2Paper Mismatch Exit

Error Handling: a b

1DuplexPaperError

2Paper Mismatch

[ Exit ]

DuplexPaperError: a b 1 *1-sided

2Display Error

Error Handling (Error detection setting)

This specifies the settings for the detection methods used for duplex printing errors and for paper size and paper type errors when the paper source is fixed.

The options available in Error Handling are as follows:

•DuplexPaperError (Duplex printing error detection setting)

•Paper Mismatch (Detection settings for paper size/type errors when the paper source is fixed)

1In the Device Comon menu, press U or V to select Error Handling.

2Press [OK]. The Error Handling menu screen appears.

DuplexPaperError (Duplex printing error detection setting)

If the error detection setting for duplex printing has been turned Display Error, and you attempt to print onto a paper size and paper type that cannot be used for duplex printing, the Duplex disabled error message will be displayed and printing will stop.

Display	• To print onto one-side of the paper only when this message
Error		is displayed, press [OK].
	•	Press [Cancel] to cancel the printing itself.
1-sided	•	To print onto one-side of the paper.

1In the Error Handling menu, press U or V to select

DuplexPaperError.

2Press [OK]. The DuplexPaperError screen appears.

3Press U or V to select the setting for handling duplex paper errors.

4Press [OK]. The handling of duplex paper errors is set and the Error Handling menu screen reappears.

4-70 Using the Operation Panel